The ED800 Battery Powered High Tip Dumper
Performing powerfully in constricted areas, the ED800 can carry 800kg loads through access points as narrow as 800mm. The Ecovolve ED800 can tip up to 1470mm high into waste containers and pour concrete easily.
Concrete is poured and precisely with the use of the Ecochute attachment (optional extra).
The ED800 increases output and reduces labour by working for up to 8 hours on full load, eliminating the need to stop to charge your equipment. After a full day of work, the ED800 will take 8 hours to recharge, ready to put it through its paces again the next day.
Functioning with zero emission and performing unobtrusively on no mark tyres, this dynamic high tip dumper provides the flexibility and suitability to work at different sites whilst causing little disruption.
See the ED800 data sheet below for further information.
| Capacity | |
| Max safe load | 800kgs |
| Unladen weight | 1200kgs |
| Skip (levelled) | 350 Ltr |
| Skip (heaped) | 480 Ltr |
| Skip (water level) | 225 Ltr |
| Drive | |
| Drive type | 1 wheel drive |
| Steering | 1 wheel steer |
| Speed | 0-6 Km/h |
| Steering angle | 90° |
| Grade ability | 15° |
| Transmission | |
| Proportional | Drive |
| Steering | Electric |
| Front tyres | 27x8,5x15 |
| Rear tyre | 21x8x9 |
| Brakes | Dynamic electric brake. Negative parking brake. |
| Hydraulic system | |
| Gear pump flow rate | 5.5 Ltr/min |
| Gear pump operating pressure | 130 bar |
| Pump motor | 2.2kw |
| Hydraulic tank capacity | 2.8Ltr |
| Electric system | |
| Voltage | 24v |
| Battery | 400Ah |
| Integrated Charging - Input | 100-240v AC |
| Integrated Charging - Output | 24v DC |
| Recharge | 8 hrs |
| Drive motor | |
| Type | Induction motor |
| Output | 5KW/7HP |
| Emissions | Zero |
| Noise | |
| Driving | 65Db |
| Buzzer | 60-80Db (adjustable) |
We aim to respond same day however it may take a little longer if your request is of a technical nature.
Speak to an expert today.
0800 233 5490
